Mochini oa Lathe oa Tšepe o Tletseng o Tšepahalang oa CQ6240
| MOETSI | CQ6240 |
| Ho thekesela holim'a bethe | Φ400mm |
| Sekepe se fetang sefapanong sa sefapano | Φ250mm |
| Ho thekesela ka lekhalo (D×W) | 520mm × 100mm |
| Bophahamo ba setsi | 200mm |
| Sebaka se pakeng tsa litsi | 1080mm |
| Bolelele ba ho Reteleha | 700-750mm |
| Bophara ba bethe | 218mm |
| Karolo e kholo ea sesebelisoa sa ho seha | 20mm × 20mm |
| Tataiso Bolelele ba kariki | 350-365 |
| Kabo ea mangolo ea sekala sa Longitudinal holim'a lebili la lebokose la apron | 0.2mm |
| Kakaretso ea leeto la sefapano se thellang | 230mm |
| Kabo ea mangolo ea tekanyo e leketlileng sefapanong sa li-slide spindle | 0.025mm |
| Bophara ba cross-slide | 118- 140mm |
| Leeto la li-slide tse kopaneng | 68-100mm |
| Kabo ea mangolo ea sekala holim'a spindle ea slide e kopaneng | 0.05mm |
| Bophara ba slide e ka holimo | 110mm |
| Kakaretso ea maeto a slide e holimo | 120mm |
| Bophara ba leakage e ka pele | 60mm |
| Sekoti sa spindle | 52mm |
| Borokho ba Taper ho latela DIN 228 (e khutsufalitsoeng) | MT-4 |
| Bophara bo boholo ba poleiti ea sefahleho le disk ea ho tiisa | 315mm |
| Nko ea sehokelo | D1-5 |
| Lebelo la lebili la spindle | 65-1800 RPM |
| Bophara ba leadscrew le khoele | 24mm×4 TPI kapa bophahamo ba modumo 6mm |
| Likhoele tsa li-pitch tsa borena | 4-60 TPI |
| Li-pitch tsa metric tsa likhoele | 0.4-16mm |
| Diphepelo tsa longitudinal (borena/metric) | 0.0021"-0.0508"/0.0527-1.2912 |
| Liphepelo tse tšelang (moemphera/metric) | 0.00043"-0.0109"/0.011-0.276 |
| Leeto lohle la quill ea tailstock | 110mm |
| Bophara ba sleeve e bohareng | Φ52mm |
| Sokete ea taper | DIN 228 MY3 |
| Kabo ea tekanyo e bohareng ba letsoho | 1mm |
| Lesale la sekala le spindle ea mohatla, sekala | 0.05mm |
| Sekotwana sa mohatla sa Taper | MT#4 |
| Maeto a Tšeletseng | 10MM |
| Palo ea lebelo le fapaneng | 2x8 |
| Lebelo la A | (50-350) rev/min 8 Lebelo |
| Lebelo la B | (250-2000) Rev/min 8 lebelo |
| Boemo ba matla a molumo ho latela Din 45635-16max | 93 db (a) |
| Enjene ea ho khanna ea spindle | 1.5KW()2.0HP） |
| Enjene ea pompo ea pholileng | 4/75HP(40W) |
| Tekanyo ea ho paka | 1940×890×1040 |
| NW/GW | 640/750KG |
Lisebelisoa tse Tloaelehileng:
• Poleiti ea ho khanna ho latela dia ea spindle 160mm: 1 Nos.
• Four Jaw independent chuck dia 160mm: 1 Nos.
• Sekotwana se ikemetseng sa Mehatla e meraro sa 160mm: 1 No.
• Poso ea sesebelisoa sa phetoho e potlakileng: Linomo tse 2.
• Lebone la Mochini: 1 No.
• Setsi se potolohang: Linomo tse 2.
• Sete ea li-collets tse 15 (5mm ho isa ho 20mm mohatong oa 1mm): 1 Nos.
• Bajari ba Lintja Dia. 20 Dia. 30:2 No.
• Li-collet tse nang le li-collet: Sete e le 1
• Litšireletso tsa Splash
• Sete ea Lisebelisoa: Sete e le 1
